Bambu Lab A1 mini
Bambu Lab A1 mini against 158 ABS products: 2 are within the published limits, 128 exceed a published limit, and 28 cannot be judged because a temperature or printer limit was not published. Checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab ABS-GF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Creality ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Creality Hyper ABS | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ELEGOO ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone ABS High-Speed | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone ABS-CF | Outside limits | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Eryone ABS-GF | Outside limits | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Eryone ABS-PC | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone ABS+ | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| eSUN 3D ABS+ | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| eSUN 3D ABS+CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| eSUN 3D ABS+HS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| extrudr DuraPro ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Hatchbox ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Hatchbox Glow ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Inland ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Inland Glow ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Kingroon ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Overture ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Overture ABS Basic | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Overture Glow ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polymaker ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polymaker Metallic Polylite Silk ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polymaker Polylite ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polymaker Silk ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Siraya Tech Fibreheart ABS HT HF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Siraya Tech Fibreheart ABS-CF Core | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Siraya Tech Fibreheart ABS-GF | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| SUNLU ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SUNLU ABS-FR | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SUNLU High Speed ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SUNLU PC-ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3D Fuel Pro ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DE Pirate Black | Fits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 76 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DEA ABS | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DJAKE ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DPower ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech ABS 3DXMax | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech ABS 3DXStat ESD | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech ABS 3DXTech | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech ABS CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| 3DXTech ABS GF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Add-North ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Add-North rABS | Outside limits | The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 105 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Alzament ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Ambrosia ABS Matte | Outside limits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed range reaches 115 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Ambrosia Über ABS | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Atomic Filament ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Atomic Filament ABS CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| AURAPOL ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| AzureFilm ABS Plus | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 110 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| AzureFilm ABS Prime | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Buddy3D ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Buddy3D Matte ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| CC3D ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| COEX 3D ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Cookiecad ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Devil Design ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eolas Prints ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy ABS ESD | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy ABS PLUS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy EASY ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy R ABS | Outside limits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy Refill ABS | Outside limits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy Refill R ABS | Outside limits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FilamentPM ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Filamentworld ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Filatech ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FLASHFORGE ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FLASHFORGE D Series ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura ABSpro | Outside limits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura ABSpro Flame Retardant | Outside limits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura EasyFil ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura EasyFil ABS - Glow in the Dark | Outside limits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura Premium ABS Medical | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura ReForm - rTitan | Outside limits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura TitanX | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Francofil ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Geeetech ABS+ | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 95 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Geeetech Upgrade ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Gizmo Dorks ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Gizmo Dorks ABS CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Gizmo Dorks Color Change ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Gizmo Dorks Fluorescent ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Gizmo Dorks Glow ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Gizmo Dorks Low Odor ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Gizmo Dorks Thermochromic ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| GST3D ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| IC3D ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| IEMAI ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| IEMAI CF-ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| IEMAI ESD-ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Inslogic ABS FR V0 | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Inslogic ABS GF10 | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| kexcelled The K5 ABS T | Outside limits | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| LDO ABS | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| MatterHackers ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Mosaic ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nebula ABS Art Glowing | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nebula ABS Art Marble Gray | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nebula ABS Art Thermo | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nebula ABS Tech 702 | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil Glow ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil X Astro ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil X Candy ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil X Industrial ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil X Matt Matte ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil X Neon ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Paramount 3D ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Paramount 3D ABS CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| PolyLite ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PolyLite Galaxy ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PolyLite Metallic ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PolyLite Neon ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator Glow ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator Primaselect ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator Primaselect Glow ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator Primavalue ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaSelect ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaValue ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Print With Smile ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrintedSolid ABS CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Professional LAB ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Push Plastic ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Push Plastic CF ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Push Plastic Matte ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| QIDI Tech ABS Metal Rapido | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| QIDI Tech ABS Rapido | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| QIDI Tech ABS-GF25 | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| QIDI Tech Odorless ABS Rapido | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments ABS V0 FR | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments Matte ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SainSmart ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Sakata 3D ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SMART MATERIALS 3D ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SmartPrint ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Snapmaker ABS | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SOVB 3D Fil ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SOVB 3D Glow ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum ABS FR V0 | Outside limits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum ABS GP450 | Outside limits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum ABS Kevlar | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum ABS Medical | Outside limits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum smart ABS | Outside limits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Tectonic 3D Aura ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TEQStone ABS | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TINMORRY ABS Pro | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Verbatim ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Winkle ABS | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. |
As an Amazon Associate we earn from qualifying purchases.
Bambu Lab A1 mini against 158 ABS products: 2 are within the published limits, 128 exceed a published limit, and 28 cannot be judged because a temperature or printer limit was not published. Checked 14 October 2026.
The filament's listed nozzle and bed maxima do not exceed the printer's listed maxima, and no recorded enclosure or hardened-nozzle requirement conflicts with the printer. Missing fields are not treated as a pass.
0 in the tray
Compare