Bambu Lab A1 mini
Bambu Lab A1 mini against 113 ASA products: 2 fit, 13 cannot reach the full recommended range, 84 cannot print this material at a recommended temperature, and 14 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ASA | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Bambu Lab ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Bambu Lab ASA Aero | Partial | The listed bed range reaches 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Bambu Lab ASA-CF | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Bambu Lab Matte ASA CF | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| colorFabb ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Creality HP ASA | — | Nozzle temperature is not in our current sources. | |
| ELEGOO ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Eryone ASA | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA Light-Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone ASA-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D ASA+ | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| extrudr DuraPro ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| extrudr DuraPro Matte ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Fillamentum ASA Extrafill | Partial | The listed bed range reaches 105 °C (221 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Overture ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Overture ASA Basic | — | Nozzle temperature is not in our current sources. | |
| Polymaker ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Polymaker Polylite ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Prusament ASA | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Siraya Tech Fibreheart ASA-GF | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| SUNLU ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| 3DEA ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| 3DJAKE ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| 3DO ASA | — | Nozzle temperature is not in our current sources. | |
| 3DPower ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| 3DXTech ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| 3DXTech ASA 3DXMax | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| 3DXTech ASA CF | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Alzament ASA | — | Nozzle temperature is not in our current sources. | |
| Ambrosia ASA | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Ambrosia ASA Dolos Color Shifting | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Ambrosia ASA Galactic | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Ambrosia ASA-CF | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Ambrosia ASA-GF | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Atomic Filament ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Atomic Filament ASA CF | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| AURAPOL ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| AzureFilm ASA Original | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| AzureFilm ASA Prime | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Buddy3D ASA | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| COEX 3D ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| COEX 3D Silk ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Cookiecad ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Devil Design ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Eolas Prints ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| EPAX ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Fiberlogy ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Fiberlogy Matte ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Fiberon Fiberon ASA-CF 08 | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| FilamentPM ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| FilamentPM ASA CF | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| FLASHFORGE ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| FLASHFORGE ASA Basic | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ASA ApolloX | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ASA ApolloX CF10 | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ASA ApolloX Flame Retardant | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ASA ApolloX Foaming | Partial | The listed bed range reaches 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 60 °C (140 °F), is within that maximum. | |
| FormFutura ASA ApolloX Kevlar | Outside limits | The listed bed temperature starts at 85 °C (185 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ASA ReForm – rApollo | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| GST3D ASA 900Grs | — | Nozzle temperature is not in our current sources. | |
| IEMAI ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| IEMAI CF-ASA | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Inslogic ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| iSangHu Gradiant ASA | — | Nozzle temperature is not in our current sources. | |
| iSANMATE ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| LDO ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| LDO ASA-CF | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Mosaic ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Nebula ASA Tech 301 | — | Nozzle temperature is not in our current sources. | |
| Nobufil ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Nobufil X CF CF ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Paramount 3D ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Polar Filament ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| PolyLite ASA | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ASA | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| PrimaSelect ASA+ | — | Nozzle temperature is not in our current sources. | |
| Print With Smile ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Professional LAB ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Push Plastic ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| QIDI Tech ASA | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| QIDI Tech ASA-Aero | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| ROSA3D Filaments ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| ROSA3D Filaments ASA 5Kevlar | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| ROSA3D Filaments ASA CF | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| ROSA3D Filaments ASA GF | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| SainSmart ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| SainSmart ASA CF | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| SainSmart Gt 3 ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Sakata 3D ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| SMART MATERIALS 3D ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| SMART MATERIALS 3D ASA GF | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| SmartPrint ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ASA 275 | Fits | A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA CF | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ASA Kevlar | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Spectrum ASA-X CF10 | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ASA-X GF10 | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Spectrum X Gf10 GF ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Tectonic 3D Aura ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| TEQStone ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| The Filament ASA | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| TINMORRY ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Voxelab ASA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Winkle ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Zyltech ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. | |
| Zyltech Matte ASA | Outside limits | The listed bed temperature starts at 90 °C (194 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot print this material at the recommended bed temperature. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab A1 mini against 113 ASA products: 2 fit, 13 cannot reach the full recommended range, 84 cannot print this material at a recommended temperature, and 14 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare