Bambu Lab P2S
Bambu Lab P2S against 113 ASA products: 87 fit, 8 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 18 are missing an essential check. Manufacturer page checked 15 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA Aero | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab Matte ASA CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality HP ASA | — | Nozzle temperature is not in our current sources. | |
| ELEGOO ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone ASA | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA Light-Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-GF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ASA+ | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro Matte ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fillamentum ASA Extrafill | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ASA Basic | — | Nozzle temperature is not in our current sources. | |
| Polymaker ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament ASA | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 110 °C (230 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Siraya Tech Fibreheart ASA-GF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DO ASA | — | Nozzle temperature is not in our current sources. | |
| 3DPower ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA 3DXMax | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament ASA | — | Nozzle temperature is not in our current sources. | |
| Ambrosia ASA | Partial | The listed bed range reaches 115 °C (239 °F), above this printer's maximum of 110 °C (230 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Ambrosia ASA Dolos Color Shifting | Partial | The listed bed range reaches 115 °C (239 °F), above this printer's maximum of 110 °C (230 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Ambrosia ASA Galactic | Partial | The listed bed range reaches 115 °C (239 °F), above this printer's maximum of 110 °C (230 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Ambrosia ASA-CF | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 110 °C (230 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Ambrosia ASA-GF | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 110 °C (230 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Atomic Filament ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ASA CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Original | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Prime | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D ASA | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 110 °C (230 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| COEX 3D ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Silk ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Matte ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberon Fiberon ASA-CF 08 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ASA CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ASA Basic | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 110 °C (230 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| FormFutura ASA ApolloX | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX CF10 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Flame Retardant | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Foaming | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Kevlar | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ReForm – rApollo | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GST3D ASA 900Grs | — | Nozzle temperature is not in our current sources. | |
| IEMAI ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSangHu Gradiant ASA | — | Nozzle temperature is not in our current sources. | |
| iSANMATE ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Mosaic ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nebula ASA Tech 301 | — | Nozzle temperature is not in our current sources. | |
| Nobufil ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil X CF CF ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyLite ASA | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ASA | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaSelect ASA+ | — | Nozzle temperature is not in our current sources. | |
| Print With Smile ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Push Plastic ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA-Aero | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA 5Kevlar | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA GF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ASA CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA GF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SmartPrint ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA 275 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA Kevlar | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X CF10 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X GF10 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum X Gf10 GF ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Aura ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament ASA | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA CF | — | Nozzle temperature is not in our current sources. | |
| TINMORRY ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Voxelab ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Winkle ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Matte ASA | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab P2S against 113 ASA products: 87 fit, 8 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 18 are missing an essential check. Manufacturer page checked 15 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare