Sovol SV08 Max
Sovol SV08 Max against 113 ASA products: 9 fit, 82 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 22 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ASA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Bambu Lab ASA Aero | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Bambu Lab Matte ASA CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| colorFabb ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| ELEGOO ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| eSUN 3D ASA+ | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| extrudr DuraPro ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| extrudr DuraPro Matte ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Fillamentum ASA Extrafill | Partial | The listed bed range reaches 105 °C (221 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Overture ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Polymaker ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Polymaker Polylite ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Prusament ASA | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Siraya Tech Fibreheart ASA-GF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| SUNLU ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DEA ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DJAKE ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DPower ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DXTech ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DXTech ASA 3DXMax | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DXTech ASA CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Ambrosia ASA | Partial | The listed bed range reaches 115 °C (239 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Ambrosia ASA Dolos Color Shifting | Partial | The listed bed range reaches 115 °C (239 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Ambrosia ASA Galactic | Partial | The listed bed range reaches 115 °C (239 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Ambrosia ASA-CF | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Ambrosia ASA-GF | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Atomic Filament ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Atomic Filament ASA CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| AURAPOL ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| AzureFilm ASA Original | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Prime | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D ASA | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| COEX 3D ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| COEX 3D Silk ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Cookiecad ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Devil Design ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Eolas Prints ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| EPAX ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Fiberlogy ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Fiberlogy Matte ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Fiberon Fiberon ASA-CF 08 | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| FilamentPM ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FilamentPM ASA CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FLASHFORGE ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FLASHFORGE ASA Basic | Partial | The listed bed range reaches 120 °C (248 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| FormFutura ASA ApolloX | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FormFutura ASA ApolloX CF10 | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FormFutura ASA ApolloX Flame Retardant | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FormFutura ASA ApolloX Foaming | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Kevlar | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ReForm – rApollo | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| IEMAI ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| IEMAI CF-ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| Inslogic ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| iSANMATE ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| LDO ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| LDO ASA-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Mosaic ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Nobufil ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Nobufil X CF CF ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Paramount 3D ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Polar Filament ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| PrimaCreator ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Print With Smile ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Professional LAB ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Push Plastic ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| QIDI Tech ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 100 °C (212 °F), is within that maximum. | |
| QIDI Tech ASA-Aero | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| ROSA3D Filaments ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| ROSA3D Filaments ASA 5Kevlar | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| ROSA3D Filaments ASA CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| ROSA3D Filaments ASA GF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SainSmart ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SainSmart ASA CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SainSmart Gt 3 ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Sakata 3D ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SMART MATERIALS 3D ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SMART MATERIALS 3D ASA GF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SmartPrint ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Spectrum ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Spectrum ASA 275 | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Spectrum ASA Kevlar | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X CF10 | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Spectrum ASA-X GF10 | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Spectrum X Gf10 GF ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Tectonic 3D Aura ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| TEQStone ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| TINMORRY ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Winkle ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Zyltech ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Zyltech Matte ASA | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Creality HP ASA | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA Light-Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-GF | — | Nozzle temperature is not in our current sources. | |
| Overture ASA Basic | — | Nozzle temperature is not in our current sources. | |
| 3DO ASA | — | Nozzle temperature is not in our current sources. | |
| Alzament ASA | — | Nozzle temperature is not in our current sources. | |
| GST3D ASA 900Grs | — | Nozzle temperature is not in our current sources. | |
| iSangHu Gradiant ASA | — | Nozzle temperature is not in our current sources. | |
| Nebula ASA Tech 301 | — | Nozzle temperature is not in our current sources. | |
| PolyLite ASA | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ASA | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect ASA+ | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA CF | — | Nozzle temperature is not in our current sources. | |
| Voxelab ASA-CF | — | Nozzle temperature is not in our current sources. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Sovol SV08 Max against 113 ASA products: 9 fit, 82 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 22 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare